Company Information

Contact this company

Your Name:*

E-mail Address:*

Phone Number (with area code):

Questions or comments:

Please enter the security code:
security image

  

ESPO Springs 'n Things
75 Pine Tree Road
Danville, PA 17821 USA

Laura Snyder
Tel: 800-903-9019
www.springsnthings.com

Categories listed in:
AMERICAN MADE PRODUCTS
AMERICAN MOTORS-AMX,JAVELIN,RAMBLER
AUTO PARTS AND SUPPLIES
CHASSIS - SUSPENSION - REAREND
CHEVY PARTS
CLASSIC AUTO - PARTS AND RESTORATIONS
FORD PARTS
FRONT SUSPENSION PARTS,KITS
LEAF AND COIL SPRINGS
MOPAR PARTS
SHACKLES AND UBOLTS
SPRINGS-LOWERING
SUSPENSION


Quality Parts at Discounted Prices FOR MOST MAKES AND MODELS FROM THE 30íS THROUGH THE 90íS

FRONT CHASSIS PARTS/KITS: adjusting sleeves, ball joints, cam bolts, control arm bushings (rubber & poly), idler arms, pitman arms, tie rod ends, sway bar bushings, strut rods (steel & aluminum), lower control arm pivots, torsion bar adjusters, coil springs

REAR SUSPENSION PARTS: shackle kits (original, adjustable and offset), rubber & poly bushings, u-bolts, end bolts, leaf springs, shock studs, tip inserts, axle pads, spring liner, clamps, centerbolts, caster wedges, A-body front and rear hangers


Front End Kits & Parts

American made!  Premium steering and suspension components meet or exceed original equipment specifications.   Restore the steering response and handling characteristics that your car had when it was new.  Kits contain the most commonly needed parts to rebuild the front suspension of your car.  Typical kits include outer tie rod ends, upper and lower ball joints, upper and lower control arm bushings, sway bar end links and sway bar frame bushings and strut rod bushings where applicable.  If your car uses shaft kits with metal bushings, these are also included.  Where the manufacturer suggests complete control arm replacement, the kit will include the control arm.  You can add any additional parts that you may need to complete your rebuilt, like inner tie rod ends, sleeves, idler arm, pitman arm, control arm bumpers, etc.  at a discounted add-on price, without being forced to buy parts that you don't need.  Parts are also available individually if your car does not need a complete rebuild.

We sell both rubber and polyurethane bushings.  Our poly is black and graphite impregnated.  It will tighten the suspension for handling and cornering.  However as with all poly, you will have more vibration in the chassis and there's the possibility of noise and squeaking.  It needs to be greased well. 

Other products:

Coil Springs

Our coil springs are American made, matched pairs made to restore both the ride height and ride quality that your vehicle had when it was new.

We sell standard and heavy duty rates, lift and lowering springs for most cars and trucks.

To give you a price or if you are ordering we need to know make, model, year, engine size and body style to get correct spring. If a cargo/variable rate spring is available for the rear we usually sell these instead of the constant rate. The cargo coil is a better design and acts as a standard duty or heavy  duty when loaded.  If you wish the constant rate, please specify.

Other products: 


Leaf Springs

Our springs are American made, matched pairs.  We do not just pull two off the shelf like most spring companies do. Spring arches vary when they come off the production line due to tolerances.  We take the extra time to match them.  This helps insure proper ride height and a level stance side to side.  Our springs are made with premium quality high alloy spring steel and meet or exceed OEM specifications.

The correct springs are determined not only by year and model, but also by body style, engine size and other variables depending on the model. We do not sell one-size fits all. In addition to stock ride height, 1" or 2" lift or lowering height is also available for many models. Both standard and heavy duty springs are also available for many models. If the spring uses a pressed in eye bushing that will come already installed in the spring.

Other products: