How to Remove and Prevent Swirl Marks on a Black Car

If you are the owner of a black vehicle and you have noticed
swirls on its surface, you may find yourself very frustrated.  In general, swirl marks on your car are
indicative of mistakes made when cleaning, polishing or painting.  Because the edges of the swirls reflect
light, theses marks can stand out dramatically in contrast to a black
background.  Not only do swirls detract
from the appearance of your car, making it look the opposite of shiny and new,
but they also shorten the life of your car’s paint job.  The good news is that with the correct
maintenance you can remove these unsightly swirls and even prevent more from
happening. 

How can I get rid of
the swirl marks? 
If the preparation
is to blame for the swirl marks on your black car, you unfortunately will have
to repaint the vehicle entirely.  If the
swirl marks are a result of post-painting improper maintenance, however, there
are steps you can take that have proven successful in removing/reducing them.  Here’s how it’s done: 

Step #1:   Before getting
started, it is best to work on a clean surface so that you don’t rub any
harmful elements into your car’s paint. 
Use your standard car cleaning soap and a professional rag to wash your
car clean of any dirt, dust, gravel or other debris.  Rinse and pat dry with a cloth. 

Step #2:  Next, apply the
automotive polish directly onto the swirled spots.  Use only a professional polishing mitt,
polish applicator or buffer (you can find these at any automotive store) and
never use a regular rag, towel or sponge as they are likely to create
additional swirls and inflict more damage on your paint job.  Start buffing at a smooth and steady pace as
you go over your car’s paint job in small, circular motions with light pressure.  If you are using a power buffer, be cautious
not to hold the buffer for too long in one place.  Keep polishing until you see a haze growing
on the surface.

Step #3:  Use a clean cloth
to wipe away the polishing haze.  Check
the surface for stubborn swirl marks and repeat the buffering process again if
needed. 

How can I prevent
swirl marks? 
To avoid more swirl
marks from wreaking havoc on your black paint job, pay special attention to
protecting it.  Here are a few tips:

Tip #1:  Because swirls on
the paint are linked to dirt and debris rubbing into the paint, keep as much of
those harmful particles away from your car as possible.  When you aren’t using your car, be sure to
keep it covered in a garage or with a good quality car cover. 

Tip #2:  Often times, swirls
can appear on the surface of your car due to improper washing and waxing.  When you can, rather than using brushes or
rags on your car that can gather dirt and rub it into your paint job, take your
car to a facility that offers touch-less car cleaning.  Have your vehicle cleaned on a regular basis
to avoid the build-up of dirt and debris.

Tip #3:  Use top quality wax.  The better the wax, the more protection it
will provide for your car.  Be sure to
select a wax that offers shine but isn’t made up of harmful compounds that will
abrade the paint. 

Contact These Advertisers for all Your Car Cleaning Needs.

 



 

Sabrina Jackson is a car enthusiast and a guest post author
who contributes to us this piece on removing and
preventing swirl marks on a black car. 
In addition to her hobby of guest posting, Sabrina also owns Free Dating Sites for Women
where she offers her advice on cyber dating and relationships.









Leave a Reply

Your email address will not be published. Required fields are marked *

CommentLuv badge