blank 07/16/12 01:42PM Car Restoration, hot rods, Muscle Cars, street rods

Bolivar Car Restoration

Bolivar Car Restoration, Muscle Cars of America

 * Full Auto Body Restoration

  • Use of PPG products. Paint work is polished to a mirror like finish. All work is completed to the customer's satisfaction.


Many auto restoration shops are forgetting about quality when restoring your classic auto, muscle car or vintage truck. I use the best products offered and take my time doing the work correctly. Every project gets stripped to the bare metal, including blasting of all jambs and hard to reach areas. The sheet metal will have any rust cut out and new metal welded in. All dings and dents are worked over and hammered out, minimal filler being used. With the sheet metal work being done, I then Epoxy prime all the bare metal, letting it cure completely. It is then scuffed down again, applying any filler if needed for those smaller blemishes left from the sheet metal work. I will then block the filler and proceed with another primer. (Your investment will be protected by 2 types of rust prevention primer). This coating is also block sanded when cured. A 2K primer sealer (grey color) is applied in several coats with blocking in between applications.  With the final sanding of the primer, the body is prepped for color.  I use PPG paints and House of Colors paints. All finishes are then wet sanded and buffed to a mirror shine. Ive always said, If you cant see yourself in the finish, it isnt done!  I take great pride in my work, paying attention to detail, as if each restoration were my own.

blank Permalink | Print | E-mail | Comments (1)